Skip to content

Pitch reference

Note frequencies

Every note is a number — the equal-tempered chart in hertz, with tones you can play right on the page.

How note names map to hertz

Tuning today divides the octave into twelve equal steps, so the relationship is multiplicative rather than a tidy list: each note is the previous note multiplied by one to the twelfth power of two. That single rule — A4 sits at 440 Hz and each semitone multiplies or divides by a fixed constant — generates the entire chart. Doubling the frequency moves exactly one octave up, which is why 110, 220, and 440 Hz all read as the note A.

The full table below uses the international A4 = 440 Hz standard, the same reference this site’s tools and tuners assume. Guitarists will recognize the low string E2 at 82.41 Hz, pianists the middle of the keyboard at C4 = 261.63 Hz, and singers their alto and tenor neighborhoods around the 200 Hz to 400 Hz span. Fixed tones that miss a chart note exactly — the common online test-tone frequencies — sit a few cents sharp or flat of their nearest label.

Equal-tempered note frequencies in Hz (A4 = 440).
NoteHzNoteHz
C4261.63G4392.00
C#4277.18G#4415.30
D4293.66A4440.00
D#4311.13A#4466.16
E4329.63B4493.88
F4349.23C5523.25
F#4369.99——

Playable reference tones from the chart

Numbers set the map; hearing sets the memory. Grouped below are the chart’s anchors as playable tones: the A series at 110 and 220 Hz and concert A 440 Hz, middle C at 261.63 Hz for keyboard pitch, the open guitar and violin strings E at 329.63, and higher-octave neighbors at 523.25 and 659.25. Press each player and hum along briefly — matching your voice to a steady tone settles the pitch into your ear far better than reading a table ever does.

Notice the two kinds of pitch in the audio world. Music uses the twelve chart slots, chosen per instrument and key; testing uses round numbers like 300 or 1000 Hz that rarely coincide with any note. Both live in the same spectrum, which is why the multi tone generator can stack exact notes for beats and chords while bench tones probe between the slots.

The A series: one note, many octaves

Following one letter up the chart shows the doubling rule plainly: A2 at 110, A3 at 220, A4 at 440, A5 at 880, A6 at 1760 Hz. Every jump is the same musical interval — one perfect octave — even while the hertz gaps double each time. Orchestras tune to A4 every night precisely because the octave series gives any instrument an easy anchor from which all twelve slots cascade.

Guitar builders exploit the same math: pressing a string at the twelfth fret doubles its vibrating length frequency, an octave above the open string. If you keep a reference pitch in your head, make it one of these As — the 220 Hz tone page and its 440 Hz sibling explain how each octave slot is used for tuning and ear training in practice.

Cents: the small deviations that tuners read

Every hundred cents equals one equal-tempered semitone, so the chart’s twelve slots stand 100 cents apart. A test tone at 432 Hz that you compare against concert A4 reads 32 cents flat — audible as a gentle sag against a tuned instrument — and a tone at 528 Hz runs 16 cents sharp of C5. Tuners, this site’s note readouts, and DAWs all quote deviation in cents for exactly this reason.

Human ears resolve pitch differences smaller than a cent in careful octave comparisons but sloppily at whipping speed, so cents matter most when two steady tones sound together: beating between them slows as they approach agreement, and stops entirely on a perfect match. Pair this page with the sine wave generator to hear that beat-slowing settle live.

Play the chart: A series and middle C

Each player runs at the exact equal-tempered hertz from the table above.

110 Hz

Stopped

220 Hz

Stopped

261.63 Hz

Stopped

440 Hz

Stopped

493.88 Hz

Stopped

880 Hz

Stopped

Play the chart: string anchors and upper octaves

E4 is the open high-E string of a guitar and the E string of a violin; 523.25 and 659.25 are the next two octave-family landmarks.

329.63 Hz

Stopped

392 Hz

Stopped

523.25 Hz

Stopped

528 Hz

Stopped

659.25 Hz

Stopped

987.77 Hz

Stopped

Frequently asked questions

What frequency is each musical note?

In modern equal temperament with A4 = 440 Hz, the octave from middle C reads C4 = 261.63, D4 = 293.66, E4 = 329.63, F4 = 349.23, G4 = 392.00, A4 = 440.00, and B4 = 493.88 Hz, with each semitone step multiplying by roughly 1.0595. The full octave-4 table appears above, and every octave copies it doubled or halved.

What note is 440 Hz?

440 Hz is A4, concert A — the international standard reference that orchestras, tuners, and this site all assume. Halving or doubling keeps pitch class while moving octave, so 220 Hz is A3 and 880 Hz is A5: same letter, different octave slot on the chart above.

What Hz is middle C?

Middle C is C4 at 261.63 Hz in the standard A4 = 440 reference. It sits near the physical middle of a piano keyboard and near the low end of comfortable adult talking-pitch range, which is why it anchors so many music-theory and instrument-range discussions.

Why does 432 Hz sound flat compared to 440 Hz?

Because it is: 432 Hz sits 32 cents — about a third of a semitone — below concert A4. The comparison is covered honestly on the 432 vs 440 page, including a side-by-side pair of players and what the slight flattening does and does not mean for listening.

How do I find the note for any frequency?

The tool on the home tone generator shows a live note readout with the nearest pitch and cents deviation as you play — type any hertz and the label answers instantly. Mathematically, take 12 × log2 of the frequency over 440, add 69, and read the result as a MIDI note number on the chart.

Are note frequencies the same for all tuning references?

No — the whole chart scales with the A4 anchor. At 442 Hz concert pitch, A3 becomes 221 Hz and C4 rises to about 263.2 Hz; historical and baroque ensembles sometimes cite 415 or 430 Hz. Equal temperament sets the spacing of the twelve slots, while the chosen anchor sets where everything lands.